Delidding Intel's Core i9-14900K can drop CPU temperatures by using as much as 12°C

Delidding isn't for the faint of coronary heart, nor is it for those that cannot have the funds for to update their CPU. For starters, it's going to void your warranty and if some thing is going incorrect, it will likely be up to you to provide you with a substitute. But in case you're willing to simply accept the ones risks and are interested by squeezing the most overall performance out of a chip, it is a tested method to shave some levels off the pinnacle.

Intel's newly released Core i9-14900K CPU has discovered its way to der8auer's test bench for a fast running temperature assessment (and in most cases to decide if his delidding equipment are well matched with the new chip).

The hardware enthusiast did the whole lot in his power to make certain a stage playing subject such as enforcing a hard and fast CPU clock velocity of five.6 GHz on the P cores and a Vcore of one.39. He additionally set the 360mm AIO cooling device's fan speed to round 2,000 RPM, and modified the water pump to a balanced profile. A 7600 XMP profile changed into additionally utilized throughout all runs.

Cinebench R23 became run with the CPU unmodified, and temperatures had been recorded at an average core load of ninety three.1 degrees C. Der8auer's delidding device made short paintings of the heatspreader, and he changed into able to lap the middle, practice liquid metallic, and reseat the heatspreader without incident.

Back up and strolling, he recorded a mean maximum P center temperature of eighty three.2 degrees C. Using a Thermal Grizzly contact body, he was able to carry the common temperature down to 81.Five ranges C.

Der8auer said he changed into amazed by way of the findings due to the fact in earlier experiments (like with the Core i9-13900K), temps with liquid metal and the unique IHS reapplied were not superb.

Your outcomes will probable vary depending on a numerous factors inclusive of the best of lapping activity, whether or no longer you use a touch body, your cooler and thermal paste of desire, and whether or not or now not you reinstall the IHS or decide to install an immediate die cooling solution.