Anker A1651 charger review; A powerful power bank in the form of a charger

Design and technologies used

Anker A1651 wall charger uses a relatively compact design. Although this product is not as small as other GaN-based wall chargers, we should not forget that it is a power bank, and a 10,000 mAh battery is also built into it. While most GaN chargers need to be plugged in, this charger can charge a variety of devices as long as it has a charge. You can also carry this product with you as a power bank. Inside the box of this product, in addition to the charger itself, there is also a fabric envelope.

Anker has used the latest and most advanced technologies in the world in this charger-powerbank. "MultiProtect" technology protects the power bank against short-circuit current, over-current, voltage and overheating. "ActiveShield" technology monitors the temperature to ensure safe charging of your devices. Finally, the "PowerIQ 3.0" technology allows the charger to monitor the power needs of connected devices and automatically allocate the current to them according to the capacity of each device.

Anker A1651 power bank has a 10,000 mAh battery and offers a maximum output power of 65 watts. This device has two USB-C ports and one USB-A port, which can charge three devices simultaneously. This power bank is also equipped with folding plugs and allows users to use it as a GaN wall charger when needed.

On the body of this 2 in 1 product, there is also a four-color LED indicator. It can be seen that by pressing its button, you can check the charge level of the power bank battery. If you press the same button twice, the "drop charging mode" will be activated to charge the wireless headphone charging cases. Usually, the charging cases of these headphones consume less power than many devices, and using this mode will help increase their battery life.

Performance

h2>

The power level of this Anker product depends on the number of connected devices and the mode that It depends on the device used (power bank or wall charger). When you use it as a wall charger, the highest power output rate offers you and at the same time the internal battery of the power bank is charged at the same time. But when you use this product as a 10,000 mAh power bank, it transmits a maximum power of 65 watts to the connected devices.

In fact, the Anker A1651 power bank can charge a device with a maximum power of 30 watts. This in itself is great for a power bank. During a test, Anker's wall charger was used to simultaneously charge the Galaxy S22, the HyperX Clutch gamepad, and the Cleer Alpha wireless headphones, and it was found that Anker's claims about the charging speed and the maximum power provided are completely true.

This powerful wall charger was able to charge the Samsung Galaxy S22 from 37 percent to 100 percent in about 55 minutes, and this is really amazing considering that two other devices were charging at the same time with this product. We should mention that Galaxy S22 supports 25W charging speed. Also, the 10,000 mAh battery of this power bank can fully charge this smartphone twice.

In order to check the performance of this product in more detail, other tests have been conducted on it, and we will refer to their results below. As a wall charger, this product managed to charge the MacBook Pro M1 to 90 percent in less than an hour. iPhone 13 Pro also reached 50% charge in less than 30 minutes with this product. Also, in another test conducted on this product, this power bank was able to charge 80% of Lenovo X280 laptop battery to 100% within one hour and eight minutes. After charging this laptop, the power bank battery was completely empty.

• 10 popular power banks in SafirSoft (15 Azar 1401)

charging speed

in Regarding the charging of the Anker power bank itself, we should mention that it takes about two and a half hours to fully charge this powerful product. This is not the first power bank that uses folding plugs. However, this is a feature that is always very welcome in power banks.

Does it make sense to buy Anker A1651 charger?

If you are looking for a powerful and high-speed charger to charge different gadgets at the same time, and in addition, you can use its 1000,000 mAh battery as a Use a portable power bank, Anker A1651 wall charger is one of the best available options for you. The maximum power of 65 watts, the use of advanced technologies and being equipped with 2 USB-C ports and 1 USB-A port are among the features that have greatly increased the value of purchasing this product.

Strengths of Anker A1651 charger

• Maximum power 65 watts
• Compact design
• Three simultaneous chargers The device
• having 2 USB-C ports and 1 USB-A port
• can be used as a 10,000 mAh power bank Hourly
• Folding plugs

Weaknesses of Anker A1651 charger

• The slow charging speed of the power bank

  In this article, we reviewed one of the newest 2-in-1 wall chargers available in the SafirSoft store, the Anker A1651 charger, and we evaluated it in different sections so that if you intend to buy a high-quality charger-power bank, This new product of Anker company from SafirSoft online store for Kh Consider your Reed.

  Do you also recommend buying this wall charger to others or do you have another opinion? Do you think there are better options than this charger in the market? We look forward to reading your comments.

  • Baseus PPNL0100 power bank/wall charger review; Different and special
  Buy Anker wall charger model A1651 from SafirSoft